Periodic Behavior and Stochastic Fluctuations of Solar Activity: Proper Orthogonal Decomposition Analysis

We use the Proper Orthogonal Decomposition (POD) to investigate the spatiotemporal features of the solar activity. Daily observation in the period 1949–1996 of the green coronal emission line at 530.3 nm are used as indicators of the activity behavior. We show that few POD modes suffice in describing both the space and time main periodicities. In particular, being affected by a strongly energetic stochastic behavior, daily data are described by five POD modes, while two POD modes are enough to describe the butterfly diagram in monthly averaged data. Apart from the basic period T₀ = 11 years, using daily data we found evidences for intercycle temporal periodicities.     

Validating a rapid-update satellite precipitation analysis across telescoping space and time scales

In order to properly utilize remotely sensed precipitation estimates in hydrometeorological applications, knowledge of the accuracy of the estimates are needed. However, relatively few ground validation networks operate with the necessary spatial density and time-resolution required for validation of high-resolution precipitation products (HRPP) generated at fine space and time scales (e.g., hourly accumulations produced on a 0.25° spatial scale). In this article, we examine over-land validation statistics for an operationally designed, meteorological satellite-based global rainfall analysis that blends intermittent passive microwave-derived rainfall estimates aboard a variety of low Earth-orbiting satellite platforms with sub-hourly time sampling capabilities of visible and infrared imagers aboard operational geostationary platforms. The validation dataset is comprised of raingauge data collected from the dense, nearly homogeneous, 1-min reporting Automated Weather Station (network of the Korean Meteorological Administration during the June to August 2000 summer monsoon season. The space-time RMS error, mean bias, and correlation matrices were computed using various time windows for the gauge averaging, centered about the satellite observation time. For ±10 min time window, a correlation of 0.6 was achieved at 0.1° spatial scale by averaging more than 3 days; coarsening the spatial scale to 1.8° produced the same correlation by averaging over 1 h. Finer than approximately 24-h and 1° time and space scales, respectively, a rapid decay of the error statistics was obtained by trading-off either spatial or time resolution. Beyond a daily time scale, the blended estimates were nearly unbiased and with an RMS error of no worse than 1 mm day^?1.     

Chemical characterization of fine particulate matter during peak PM10 episodes in Apulia (South Italy)

Some peak PM10 episodes, occurred during PM monitoring campaigns performed on October 2005 and February and June 2006 in Bari town, have been characterized. Moreover back trajectories of air masses and Principal Component Analyses were applied. Three of the peak PM10 episodes investigated were related to local emissions of primary pollutants during poor atmospheric dispersion conditions. The other two peak PM10 episodes considered are related with long range transport air masses toward Apulia region: in one case the chemical characterization and the back trajectories analysis indicate that high PM10 value detected is due to the Saharan dust advection in the Apulia region; in the other case air masses with different origin give rise to high PM10 value.Moreover PM10 daily mean concentrations, presented in this paper collected from January 2005 to August 2007 and obtained by automatic device in six stations of air quality monitoring networks in Bari territory, do not show a seasonal trend for PM10 concentrations, contrary to the PM10 trend shown in the towns of North Italy. This can be explained mostly considering that our region presents generally meteo-climatic conditions that favour pollutants dispersion.     

Ar-Ar laser dating of tektites from the Cheb Basin (Czech Republic): Evidence for coevality with moldavites and influence of the dating standard on the age of the Ries impact

Moldavites (Central European tektites) are genetically related to the impact event that produced the ∼24-km diameter Ries crater in Germany, representing one of the youngest large impact structures on Earth. Although several geochronological studies have been completed, there is still no agreement among ⁴⁰Ar-³⁹Ar ages on both moldavites and glasses from Ries suevites. Even recently published data yielded within-sample mean ages with a nominal spread of more than 0.6 Ma (14.24-14.88 Ma). This age spread, which significantly exceeds current internal errors, must be in part ascribed to geological and/or analytical causes.This study reports the results of a detailed geochronological investigation of moldavites from the Cheb area (Czech Republic), which have never been dated before, and, for comparison, of two samples from type localities, one in southern Bohemia and the other in western Moravia. We used ⁴⁰Ar-³⁹Ar laser step-heating and total fusion techniques in conjunction with microscale petrographic and chemical characterization. In addition, with the purpose of ascertaining the influence of the dating standards on the age of the Ries impact and making data from this study and literature consistent with the now widely used Fish Canyon sanidine (FCs) standard, we performed a direct calibration of multi-grain splits of the Fish Canyon biotite (FCT-3) with FCs. The intercalibration factors (), determined for eight stack positions in one of the three performed irradiations, were indistinguishable within errors and gave an arithmetic mean and a standard deviation of 1.0086 ± 0.0031 (±2σ), in agreement with previous works suggesting that biotite from the Fish Canyon Tuff is somewhat older (∼0.8%) than the coexisting sanidine.Laser total fusion analysis of milligram to sub-milligram splits of five tektite samples from the Cheb area yielded mostly concordant intrasample ⁴⁰Ar-³⁹Ar ages, and within-sample weighted mean ages of 14.66 ± 0.08-14.75 ± 0.12 Ma (±2σ internal errors, ages relative to FCs) that overlap within errors. These ages match those obtained for samples from western Moravia (14.66 ± 0.08 Ma) and southern Bohemia (14.68 ± 0.11 Ma), supporting the genetic link between Cheb Basin tektites and moldavites, and, consequently, between Cheb Basin tektites and the Ries impact. In contrast to samples from the Cheb area and Moravia, ⁴⁰Ar-³⁹Ar ages from total fusion experiments on the Bohemian specimen ranged widely from ∼14.6 to ∼17.0 Ma. Older apparent ages, however, were systematically obtained from fragments characterized by visible surface alteration. Laser step-heating experiments, although displaying slightly disturbed age profiles, were in line with total fusion analyses and yielded well-defined plateau ages of 14.64 ± 0.11-14.71 ± 0.11 Ma (±2σ internal errors, ages relative to FCs).A thorough comparison of our and previous ⁴⁰Ar-³⁹Ar ages on both moldavites and Ries suevite glasses, recalculated relative to the ⁴⁰Ar^∗/⁴⁰K ratio recently determined for FCs using intercalibration factors available in or derivable from the literature, reveals some inconsistencies which may be ascribed to either geological or analytical causes. Based on our data, decay constants in current use in geochronology, and ages calculated relative to FCs, we infer that the age of moldavites is 14.68 ± 0.11 Ma (±2σ, neglecting uncertainties in the ⁴⁰K decay constants).     

Roughness effect on the correction factor of surface velocity for rill flows

Flow velocity is one of the most important hydrodynamic variables for both channelized (rill and gullies) and interrill erosive phenomena. The dye tracer technique to measure surface flow velocity V_s is based on the measurement of the travel time of a tracer needed to cover a known distance. The measured V_s must be corrected to obtain the mean flow velocity V using a factor α_v = V/V_s which is generally empirically deduced. The V_s measurement can be influenced by the method applied to time the travel of the dye-tracer and α_v can vary in different flow conditions. Experiments were performed by a fixed bed small flume simulating a rill channel for two roughness conditions (sieved soil, gravel). The comparison between a chronometer-based (CB) and video-based (VB) technique to measure V_s was carried out. For each slope-discharge combination, 20 measurements of V_s, characterized by a sample mean V_m, were carried out. For both techniques, the frequency distributions of V_s/V_m resulted independent of slope and discharge. For a given technique, all measurements resulted normally distributed, with a mean equal to one, and featured by a low variability. Therefore, V_m was considered representative of surface flow velocity. Regardless of roughness, the V_m values obtained by the two techniques were very close and characterized by a good measurement precision. The developed analysis on α_v highlighted that it is not correlated with Reynolds number for turbulent flow regime. Moreover, α_v is correlated neither with the Froude number nor with channel slope. However, the analysis of the empirical frequency distributions of the correction factor demonstrated a slope effect. For each technique (CB, VB)-roughness (soil, gravel) combination, a constant correction factor was statistically representative even if resulted in less accurate V estimations compared to those yielded by the slope-specific correction factor.     

Rill flow resistance law under equilibrium bed‐load transport conditions

In this paper, a recently deduced flow resistance equation for open channel flow was tested under equilibrium bed‐load transport conditions in a rill. First, the flow resistance equation was deduced applying dimensional analysis and the incomplete self‐similarity condition for the flow velocity distribution. Then, the following steps were carried out for developing the analysis: (a) a relationship (Equation  13 ) between the Γ function of the velocity profile, the rill slope, and the Froude number was calibrated by the available measurements by Jiang et al.; (b) a relationship (Equation  17 ) between the Γ function, the rill slope, the Shields number, and the Froude number was calibrated by the same measurements; and (c) the Darcy–Weisbach friction factor values measured by Jiang et al. were compared with those calculated by the rill flow resistance equation with Γ estimated by Equations  13 and 17 . This last comparison demonstrated that the rill flow resistance equation, in which slope and Shields number, representative of sediment transport effects, are introduced, is characterized by the lowest values of the estimate errors.     

Jurassic stratigraphy of the Belluno Basin and Friuli Platform: a perspective on far-field compression in the Adria passive margin

Anomalous patterns of the sedimentary architecture have been recognized in passive margins, and only recently they have been associated with plate reorganization or compressional deformations propagating from distant margins. With the aim of discussing the sedimentary architecture and the potential tectonic perturbations to the passive margin pattern, we present the revision of the stratigraphy of a fossil passive margin, involved in the retrobelt of the Alpine orogeny. The main events at the transition from rifted to passive margin have been controlled by palaeoceanography, i.e. the trophic state of surface waters that hampered the carbonate photozoan productivity for a long period between Toarcian and Callovian. Toward the latest Bajocian–earliest Bathonian, the platform productivity increased, dominated by ooids. A regressional trend up to the Middle Bathonian allowed the rapid infilling of the previous rift basin. The successive aggradation in the platform was still dominated by non-skeletal grains until the Early Oxfordian. The Middle Oxfordian to Early Kimmeridgian was a time of recovery of the palaeoceanographic conditions allowing the establishment of a hydrozoan/coral rich platform. The sedimentation rates in the platform increased at the margin of the productive Friuli–Adriatic Platform. From Late Kimmeridgian on, the sedimentation rates at the platform margin returned to the pre-Oxfordian values. At the scale of the whole Adriatic Platform, the Middle Oxfordian to Early Kimmeridgian interval is variable in thickness from 0 to 800 m, and it depicts a couple of folds of around 80–100 km of wavelength. The subsidence analysis of wells and composite logs from literature suggests this interval as a perturbation to the passive margin trend of around 3 Myr of duration. We interpret this folding event, superimposed to the passive margin subsidence, as the far field expression of the transition from intraoceanic to continental obduction, occurred at the eastern Adria active margin.     

U?Pb and 40Ar?39Ar geochronology of Palaeozoic units in the northern Apennines: determining protolith age and alpine evolution using the Calamita Schist and Ortano Porphyroid

In the northern Apennines, the Palaeozoic basement involved in the Late Oligocene–Middle Miocene nappe stack contains metamorphic units for which hypothetical ages have been assigned on the basis of lithological correlations with the Palaeozoic formations of the Variscan chain in Sardinia. This uncertainty concerning the age poses limitations to reconstructing the Palaeozoic stratigraphy, defining the Alpine and pre‐Alpine histories and correlations with other domains of the Variscan chain. We present the U Pb age of detrital zircon and the ⁴⁰Ar ³⁹Ar age of metamorphic muscovite for the Calamita Schist and Ortano Porphyroid, two metamorphic units of undetermined Palaeozoic age cropping out in the eastern Elba Island. The radioisotopic data allows us to: (i) define the Early Carboniferous and Middle Ordovician ages for the Calamita Schist and Ortano Porphyroid, respectively, as well as their derivation (flysch deposit and magmatic rocks); (ii) pose some constraints concerning their alpine tectonic and metamorphic histories. These new data generate a more precise reconstruction of the Palaeozoic sequence in the northern Apennines, and they document that the Palaeozoic basement involved in the alpine deformation underwent internal stacking with an inversion of the original sequence. Copyright © 2010 John Wiley & Sons, Ltd.